Summer high temperature, especially in the south weather is wet, rain and more, some maintenance should be suspended. Otherwise prone to the following situation:

Chassis armor unfavorable bonding. Chassis is closer to the ground, especially easy to rust, so do the car chassis cleaning and rust treatment is very important. The general step is to clean, and then anti-rust treatment, the whole process needs to last two hours. Do a chassis anti-rust treatment, rust effect can basically be maintained for many years. But if the wet weather in the chassis armor, rust-proof material in the resin, rubber bonding in the metal surface, will be more than a layer of water vapor, is not conducive to the bonding between them, this time in particular should not use water-based chassis armor products. And when the air humidity is greater than 60% is not suitable for construction, moisture too much will make the product difficult to dry, directly affect the product adhesion. However, this time if you encounter sunny, air volume of the larger days of construction, basically will not be affected. Car front standard

Paste the explosion-proof film time longer. After the general film, there are half a day or even a day or so can not lift the window glass, but if the owner must choose the film in the wet weather, this time to be extended to two days or three days is appropriate, the reason is between the insulation film and glass Of the water is not easy to evaporate, if the early lift window, will affect the film surface and the window of the bonding effect.

Waxing is not easy to produce luster. Wet weather waxing, the effect will be greatly reduced. Because at this time the body surface moisture too much, if the use of hard wax, it coated with the paint after the poor adhesion; if the choice of water wax, although it can be bonded with the paint, but polished when it is not easy to produce gloss, The cloth wiped the vehicle surface again.

Paint is not conducive to dry. Encountered scratches, small scratching should be repaired as soon as possible, but the paint to try to avoid during the wet period. In accordance with the strict filling process, paint before the need for dust, dry grinding, wet grinding, infrared light drying, and finally paint, in the wet weather should not fill paint.

Steam disinfection unwanted work. The use of steam disinfection, is a method of effective sterilization in the car. But in the hot and humid weather, it is recommended to try to suspend. Because, the use of steam disinfection, in their own wet conditions, will increase the car moisture, especially for the car is harmful. Moreover, the steam sterilization is generally valid for a month, but in the wet season will produce significant mold, if you choose this time construction, its role will be greatly offset, no doubt increase the owner of the cost of the budget. In addition, spray-type fungicides are not suitable for use at this time, because the smell of such products will be attached to the car, than usual to spend more time to distribute.