Hot summer for the car is also a "hard to end" season. Owners must pay special attention to some of the details of the car in order to prevent the car "heat stroke." Car front standard

Protect the paint - the sun's exposure to the car paint a lot of damage. For the care of their car "face" of the owners, we must always wash and regularly waxing. If you want to do a more thorough protection work, it is recommended to make a paint seal glaze or coating, to paint a layer of "crystal protective clothing."

Pay attention to clean - in the summer of love to open the window, the dust is easy to blow into the car, after a period of time, the car will become sticky and dirty, and even smell appear. Dashboard, door trim and other plastic parts with a brush to clean with the cleaning agent. In order to prevent the UV radiation caused by cracking, aging, after cleaning can be coated with a layer of table wax.

To prevent puncture - the summer road temperature is higher, the use of car tires more harsh environment, so be sure to do a good job car tire inspection and maintenance work, regular inspection tire pressure to prevent puncture.

Check the brakes - the rainy season pavement caused by the friction between the tire and the road surface to reduce the coefficient, especially in the case of tires at the water, the friction coefficient is lower, a sensitive braking system is particularly important, so always check Brake system, try to be prepared.

Prevention is not "burning" - the summer is a high incidence of vehicle spontaneous combustion, it is understood that improper operation of the driver or car hidden danger is the main cause of spontaneous combustion. So to focus on checking the car's oil and electricity lines, found that the aging line should be promptly repair, to prevent spontaneous combustion.

Use air conditioning - into the compartment before the first open the window ventilation, while opening the outer loop, to be hot air after the car and then open the air conditioning, so the cooling effect faster and better. When the speed is less than 25km / h or so, air conditioning should be placed in the lower gear, to prevent power generation and air conditioning is insufficient. Rainy day driving, window glass easy to fog, affecting the line of sight, this time as long as the wind direction to the windshield direction, open the compressor to send air, you can achieve the purpose of effective defogging in a few seconds.

To prevent evaporation - the summer temperature is high, oil and water evaporation will increase, so be sure to cover the tank tight, tubing to prevent oil leakage; often check the water level of the tank, crankcase oil, The total liquid level inside the brake fluid and the battery electrolyte density and liquid level. When not in accordance with the provisions of the time to add and adjust.

Pay attention to "antifreeze" - to the summer, some people think that antifreeze is not on, you can use ordinary tap water instead, in fact, this approach is wrong. Professional preparation of antifreeze is not only low temperature, high temperature characteristics are particularly good. High-quality antifreeze close to 200 ℃ can be "boiled". Summer use of antifreeze, the owner is not easy to be water tank "boil" troubled. In addition, the antifreeze also rust, descaling effect. So the summer still need to use the original antifreeze, it can play a "summer cooling" role.

Air conditioning and refrigeration systems - air conditioning is a very frequent use of the summer components, but also the most prone to failure. The most common fault in automotive air conditioning systems is refrigerant leakage and poor cooling. Refrigerant leakage is usually caused by the aging of the sealing ring in the pipeline, the abnormal pressure of the refrigerant, the damage to the system components and the like. After the leaks are repaired, the refrigerating machine oil must be replenished and the system is evacuated and filled with refrigerant. The refrigerating machine oil and the refrigerant must be of the same quality as the vehicle required model. In many poor refrigeration failure, the most common is the poor air conditioning system, the need for maintenance of the project is mainly the cleaning of the condenser and the working conditions of the cooling fan.